VREL R1 Street Sport Coilovers for 2015-2020 Honda Fit (GK5)
Regular price
$999.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Payment details
Help your customers identify what payments are accepted by your store.
Got questions?
Feel free to get in touch
Tag @vrel.performance on Instagram to be featured.
R1 Street Sport
Full-length street sport coilovers for stance and handling.
Engineered for drivers who want aggressive lowering with the adjustability to dial in a balanced setup of street comfort and sharp, confident handling.
2015-2020 Honda Fit LX/EX/EX-L/Sport
GK5
1.5L I4 · FWD
CORE PERFORMANCE SPECS
The 3 Specs That Matter Most
Quickly compare damping, ride height and construction before you buy.
Damping Control
24-Way AdjustableTool-Free Linkage-Mounted
Ride Height
Full-Length Adjustable0-50 mm Lowering Range
Construction
Twin-Tube55CrSi Springs · Hard-Chrome Rod
RIDE FEEL
What It Feels Like on the Road
Lower the car, tighten the chassis and keep the ride usable for daily driving.
Comfort
Composed Daily Driving
The twin-tube architecture absorbs road imperfections with OEM-like civility. Set damping to the softer end and the R1 smooths out potholes, expansion joints, and rough city pavement without excessive harshness.
Street
Balanced Street Performance
Dial in a few clicks of damping and the chassis settles — reduced body roll, sharper turn-in, and a connected feel without beating you up on long drives. The 24-way range gives you granular control over ride firmness.
★ Sweet Spot
Stance — R1's Sweet Spot
Aggressive Low, Usable Travel
Full-length adjustment is where the R1 shines. Unlike shock-body-adjustable kits that lose travel when lowered, the R1's full-length design lets you achieve a slammed stance while keeping suspension travel — no bottoming out, no bouncing. This is the core reason the R1 exists: to give you the look you want without destroying the ride quality you need.
Track
Ready for Weekend Track Use
The R1 can handle occasional track days and autocross, but it's not its primary mission. For dedicated track use, consider the R2 with its monotube construction, 32-way damping, and enhanced heat resistance.
Considering Track Use?
Step Up to R2
If you plan to track your car regularly, the R2 offers monotube construction for enhanced heat dissipation, 32-way damping for finer control, and gas-oil separation for consistent performance under sustained load.
Full Specifications
Engineering Deep-Dive
Every component, specified. Every material, validated.
Damping & Adjustment 24-Way · Full-Length
| Damping Adjustment | 24-Way Adjustable (Tool-Free Linkage-Mounted) |
| Height Adjustment Type | Full-Length Adjustable |
| Front Lowering Range | 0-50 mm / 0-2.0 in |
| Rear Lowering Range | 0-40 mm / 0-1.6 in |
Construction & Materials Twin-Tube · Cr-Mo
| Internal Construction | Twin-Tube |
| Body Material | Chromoly Steel (Cr-Mo) |
| Body Finish | Zinc-Plated Steel (Anti-Corrosion) |
| Thread Type | Anti-Debris Trapezoidal Thread |
| Piston Rod Material | Cr-Mo Steel with Hard Chrome Plating |
| Spring Material | High-Tensile 55CrSi Alloy Steel |
| Front Spring Rate | 5 kg/mm (280 lbs/in) |
| Rear Spring Rate | 3 kg/mm (168 lbs/in) |
55CrSi Chromoly Springs — Consistent Performance Under Load
VREL coilover springs are forged from high-tensile 55CrSi chromoly alloy steel, designed to maintain consistent spring response and resist fatigue under repeated compression — validated through 3 million cycle fatigue testing.
Hard-Chrome Plated Piston Rod — A Core VREL Advantage
The Cr-Mo steel piston rod features a hard chrome plating surface treatment (HRC 70+ hardness) that delivers three key performance advantages over standard steel rods: high wear resistance that helps extend oil seal life, enhanced corrosion resistance for harsh climates and winter road salt, and low-friction operation that helps maintain consistent damping response across millions of cycles — validated through 3 million cycle fatigue testing.
Fluid & Seals FUCHS Oil · NOK Seals
| Damper Oil | FUCHS (Germany) |
| Seals | NOK (Japan) |
Mounts & Hardware Polyurethane Bushings
| Bushing Material | High-Density Polyurethane |
Vehicle Fitment GK5
| Year Range | 2015-2020 |
| Make / Model | Honda Fit |
| Chassis Code | GK5 |
| Trim Level | LX/EX/EX-L/Sport |
| Engine | 1.5L I4 |
| Drive Type | FWD |
| Body Style | Hatchback |
Warranty & Logistics 2-Year · 15-Day Lead
| Warranty | 2 Years |
| Lead Time | 15 Days |
| Gross Weight | 25 kg (55 lbs) |
| Package Dimensions | 65 × 45 × 13 cm |
Package Contents
What's in the Box
Complete bolt-on kit — everything needed for installation.
Product Flat-Lay
- 2x Front Coilover Dampers (Pre-assembled)
- 2x Rear Coilover Dampers (Pre-assembled)
- Adjustment Wrenches (for damping & height)
- Installation Hardware Kit (Bolts, Washers, Spacers)
Before You Install
Fitment & Installation Notes
Important information to ensure proper fitment and safe installation.
BEFORE YOU INSTALL: Professional installation and 4-wheel alignment required. Preload is factory-set.
Installation Requirements & Preload Pro-Install · Factory-Set
- Professional installation is strongly recommended.
- Requires specialized tools and a vehicle lift.
- 4-wheel alignment is mandatory after installation.
- Spring preload is factory-set out of the box — do not adjust preload rings.
- Only adjust damping and ride height using the provided wrenches.
Vehicle Compatibility & Fitment Notes GK5
- Year Range: 2015-2020
- Make / Model: Honda Fit
- Chassis Code: GK5
- Trim Level: LX/EX/EX-L/Sport
- Engine: 1.5L I4
- Drive Type: FWD
- Body Style: Hatchback
Reference
Installation Torque Specifications
Standard torque values for VREL coilover mounting hardware.
Installation Torque Specifications M8 · M10 · M12 · M14 · M16
| M8 Bolt | 25 N·m |
| M10 Bolt | 25 N·m |
| M12 Bolt | 40 N·m |
| M14 Bolt | 50 N·m |
| M16 Bolt | 50 N·m |